Yesterday, we answered some key questions about lockout/tagout requirements. Today, we answer additional questions, and tell you about a safety resource that can answer so many more—about lockout and a multitude of other safety and health concerns.
Q. Can a duplicate key for the purpose of lock removal under LOTO be held in a secure area with a procedure in place for access to the key and returning the key that does not jeopardize the employee’s safety?
A. Here is a paragraph from an OSHA letter of interpretation dated February 28, 2000, which may be applicable to your situation:
The use of a master key to remove a lockout device would be deemed equivalent (to the removal of the lock by the person who applied it) only if it is performed under the employer’s direction and in accordance with the requirements established in 1910.147(e)(3).
Obviously, the “one person, one lock, one key” practice is the preferred means and is accepted across industry lines, but it is not the only method to meet the language of the standard. However, prior to the use of the master key method, specific procedures and training, meeting the §1910.147(e)(3) exception, must be developed, documented, and incorporated into your energy control program.
Among the features essential to a compliant master key procedure is a reliable method to ensure that access to the master key will be carefully controlled by the employer such that only those persons authorized and trained to use the master key in accordance with the employer’s program can gain access.
Great news! BLR’s renowned Safety.BLR.com® website now has even more timesaving features. Take our no-cost site tour! Or better yet, try it at no cost or obligation for a full 2 weeks.
Q. If equipment has a safety interlock and it’s own safety disconnect built in the unit, would it still need to be included in a lockout/tagout policy?
A. According to 1910.147(c)(4)(i), procedures must be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
You need not document the required procedure for a particular piece of equipment, however, if you can show that your machine meets the following conditions:
- The machine or equipment has no potential for stored or residual energy or reaccumulation of stored energy after shut down which could endanger employees;
- The machine or equipment has a single energy source, which can be readily identified and isolated;
- The isolation and locking out of that energy source will completely deenergize and deactivate the machine or equipment;
- The machine or equipment is isolated from that energy source and locked out during servicing or maintenance;
- A single lockout device will achieve a locked-out condition;
- The lockout device is under the exclusive control of the authorized employee performing the servicing or maintenance;
- The servicing or maintenance does not create hazards for other employees; and
- In utilizing this exception, you have had no accidents involving the unexpected activation or reenergization of the machine or equipment during servicing or maintenance.
- Side-by-Side State/Federal Compliance. By placing our state and federal regulatory analysis side by side, you easily see how to fully comply with both governmental entities.
- MSDS Library Expansion. The site now provides an immense library of 3.5 million MSDS forms, with about 10,000 more added or changed every week. Need one? Just call up the chemical by name, manufacturer, product group, or CAS number, then print it out.
- Newsletter Wizard. If you’ve ever wanted to publish a safety newsletter but felt lacking in editorial skills, this new addition is for you.
- Plan Builder. Select from our library of safety plans, customize them to suit your company’s needs, and assemble them into collections you can save in our personal library.
Your one-stop safety management resource, available 24/7. Go here to take a no-cost site tour or here to try it in your own office!
Answers to Your Questions
Safety.BLR.com has answers to your most pressing safety and health questions—and a whole lot more.
Whether it’s questions about OSHA requirements, innovative ideas for improving safety, keeping up with the news and views in your field, or some other vital safety and health issue, you’ll find it all reported and interpreted for you 24/7 by our safety experts at Safety.BLR.com.
What’s more, this one-stop safety website is a fantastic resource for safety training materials on just about any topic you can imagine.
Training responsibilities become a snap with the website’s thousands of audio presentations, PowerPoints, prewritten safety meetings, toolbox talks, trainer’s guides, and much, much more. You’ll find training tools on more than 120 safety topics along with plain-English compliance analysis and other resources.
At a time when budget considerations are paramount, what makes more sense than an all-in-one safety training and compliance solution?
And BLR has revamped Safety.BLR.com to meet your needs even better. You’ll be amazed by all the features and functionality of the site. Highlights include:
We’re pretty excited about Safety.BLR.com and all of its enhancements, and we’re eager for you to experience it, too. That’s why we’ve created a complimentary site tour, available here. It takes just 5 minutes.
If you like what you see, you’re invited to try the site at no cost and with no obligation. We’ll even give you a complimentary special report for doing so. Go here to take a 5-minute tour of Safety.BLR.com. It may be just what you’re looking for.