The following materials are deemed not to be solid wastes and therefore are not hazardous wastes:
- Domestic sewage and mixtures of domestic sewage and other wastes that pass through a sewer system to a publicly owned treatment works (POTW) for treatment. EPA interprets this exclusion to also apply to waste mixtures that pass through a federally owned treatment works (FOTW).
- Industrial wastewater discharges that are point source discharges subject to regulation under the CWA. This exclusion only applies at the discharge point where the wastes are first subject to CWA regulation. Many industrial facilities that treat wastewater on-site use this point source discharge exclusion.
- Irrigation return flows.
Environmental Compliance in [Your State] gives you expert analysis of your state environmental regulations, along with instant comparisons between federal and state environmental protection agency regulations. Every key 40 CFR topic is at your fingertips. Get Your Free Trial
- Source, special nuclear, or by-product material as defined by the Atomic Energy Act (i.e., radioactive wastes). Note that only the radioactive components of the waste are excluded. If nonradioactive components of the waste make it a RCRA hazardous waste, it is regulated by both RCRA and the Atomic Energy Act.
- Materials subject to in-situ mining techniques that are not removed from the ground as part of the extraction process.
- Pulping liquors (i.e., black liquor) that are reclaimed in a pulping liquor recovery furnace and then reused in the pulping process, unless it is accumulated speculatively.
- Spent sulfuric acid used to produce virgin sulfuric acid, unless it is accumulated speculatively.
- Secondary materials that are reclaimed and returned to the original process or processes in which they were generated and are reused in that production process. This exclusion has limitations stipulating storage only in tanks, closed processes, accumulation for no more than 12 months, no incineration or other controlled flame combustion reclamation, no fuel production, and no use in a manner constituting disposal. This exclusion is known as the "closed-loop recycling exclusion."
- Reclaimed spent wood preserving solutions and wastewaters containing spent preservative that are reused for their original intended purpose, provided that certain conditions are met including: reuse of the wastewaters and solutions on-site at waterborne plants in the production process for their original intended use; prior to reuse, management of the wastewaters, and solutions to prevent release to land or groundwater; prior to reuse, units used to manage the wastewaters or solutions can be visually determined to prevent releases to land or groundwater; prior to reuse, drip pads used to comply with the standards set forth at 40 CFR 265.440 et seq.; prior to operating under this exclusion, the plant owner or operator submits a one-time notification to the EPA regional administrator (or the appropriate state director) in accordance with 40 CFR 261.4(a)(9)(iii)(E).
- The following coke by-product wastes: EPA Hazardous Waste Nos. K060, K087, K141, K142, K143, K144, K145, K147, and K148, and any wastes from the coke by-products process that are hazardous only because they exhibit the toxicity characteristic specified in 40 CFR 261.24 when recycled in accordance with 40 CFR 261.4(a)(10).
State environmental compliance is probably your biggest job challenge—the regulations and laws are so complex and they change so fast! Take a free trial of Environmental Compliance in [Your State] and see why thousands of companies have relied on the Environmental “Red Book” for over 16 years. Get Your Free Trial
- Nonwastewater waste splash condenser dross residue from the treatment of K061 waste in high-temperature metals recovery units, provided the residue, if shipped, is in drums and not land disposed before recovery.
- Oil-bearing hazardous secondary materials (e.g., sludges, by-products, or spent materials) that are generated at a petroleum refinery (SIC Code 2911) and inserted into the petroleum refining process, or recovered oil, provided the material is not managed on the land or accumulated speculatively before placement in the refinery process. Recovered oil does not include oil-bearing hazardous waste listed in 40 CFR 261 before the oil is recovered nor does it include used oil as defined in 40 CFR 279.
See tomorrow’s Advisor for more materials that aren’t wastes.