Practical EHS Tips, News & Advice. Updated Daily.
Modern safety management goes beyond covering traditional workplace accidents to now being equally concerned with illnesses caused on and even off the job. This section will explain what you need to know to avoid both injuries and illnesses, and to track your progress in reaching this goal.
Free Special REport: Does Your PPE Program Meet OSHA’s Requirements?
Back to Basics is a weekly feature that highlights important but possibly overlooked information that any EHS professional should know. This week, we examine how to manage the growing population of older workers. It’s no secret that the aging workforce is having a major impact on workplaces. According to Pew Research Center, the current workforce of 11 […]
The National Safety Council (NSC) recently released a white paper exploring the use of location geofencing along with other technologies like proximity sensors, wearables, and vehicle monitoring systems to reduce serious incidents and fatalities (SIF). The NSC’s “Work to Zero” initiative released its white paper, “Advancing Workplace Safety with Location Geofencing,” to shed light on […]
MTD Products Inc., doing business as Stanley Black + Decker, faces $222,392 in Occupational Safety and Health Administration (OSHA) fines after a 29-year-old maintenance electrician suffered severe burns during an electrical arc blast at the company’s Willard, Ohio, facility, the agency announced May 28. An arc flash occurs when an electric current travels from one […]
In this installment of EHSDA Shorts, Matthew Marino, Owner, Evolving Innovation, and Dr. Ram Maikala, PhD, ASP, FHFES, Program Technical Consultant, National Safety Council, discuss what workplaces can do to prevent musculoskeletal disorders (MSD). The webinar was moderated by Jay Kumar, Editor-in-Chief of EHS Daily Advisor. This clip was taken from a webinar titled “Panel […]
Wisconsin pallet manufacturer Konz Wood Products is facing $177,453 in Occupational Safety and Health Administration (OSHA) penalties after a 57-year-old worker was fatally struck by the carriage of a lumber stacking machine. OSHA investigators learned that the company hadn’t ensured the machine was locked out when an employee removed a board jammed in the machine. […]
Back to Basics is a weekly feature that highlights important but possibly overlooked information that any EHS professional should know. This week, we examine how to prepare for construction fall hazards. Are you ready for the hazards of summer building, including the construction industry’s deadliest hazard? Falls from heights can cause serious, sometimes fatal, injuries. Fall […]
Granite & Marble Services LLC, a Linden, New Jersey, contractor, has agreed to pay a $13,500 Occupational Safety and Health Administration (OSHA) fine following a worker’s fatal fall at a Bayonne building site, the agency announced May 23. After OSHA cited the contractor with four serious safety violations, the company requested an informal conference with […]
In cases where Legionella hazards can’t be controlled with engineering and administrative controls, personal protective equipment (PPE) may be needed to prevent worker exposures and infections. Here’s what you need to know about how to protect workers against Legionella exposure with PPE.
Back to Basics is a weekly feature that highlights important but possibly overlooked information that any EHS professional should know. This week, we examine how to control and prevent the growth of Legionella bacteria in your water systems. Legionellosis, which can lead to Legionnaires’ disease and Pontiac Fever, is spread primarily through inhaling Legionella-contaminated, aerosolized water. […]
Chicago-area subcontractor K.L.F. Enterprises faces $392,002 in Occupational Safety and Health Administration (OSHA) fines for exposing its employees and others to asbestos during the structural demolition of a Waukegan, Illinois, hospital, the agency announced May 15. Agency investigators observed K.L.F. employees not wearing protective equipment amid piles of debris and steel I-beams during the structural […]