Practical EHS Tips, News & Advice. Updated Daily.
Failure by employers to develop and use hazardous energy control procedures as required by OSHA’s lockout/tagout standard (29 CFR 1910.147) is one of the Agency’s annual top 10 most frequently cited workplace safety violations. Perhaps the most demanding compliance obligation is establishment of a written energy control program.
Does your safety program effectively protect workers when they are exposed to moving machine parts and hazardous energy? The machine guarding and lockout/tagout (LOTO) standards are consistently on the list of the top 10 most frequently cited OSHA standards—read on for a Q&A on the basics, as well as an opportunity to join our live […]
Servicing and maintaining equipment is dangerous business, causing up to 50,000 injuries and 120 fatalities, including electrocution, burns, crush injuries, cuts, lacerations, amputations, and fractures, each year. Obviously, a strong regulatory system is needed, but does OSHA’s standard reflect current technology? What are some of the alternative methods that can be used that offer the […]
Every year, between 150 and 200 fatalities and some 50,000 injuries occur due to failure to control the release of hazardous energy. Lockout/tagout (LOTO) refers to the OSHA-required practices and procedures to protect workers from unexpected start-up of machinery or hazardous energy released during service or maintenance.
What gets employers into LOTO trouble with OSHA? Attorney Nickole Winnett, shareholder in the Washington, D.C., office of Jackson Lewis, points to a number of culprits, including failing to ensure that energy control procedures have been developed, documented, and are in use for each piece of equipment where servicing and maintenance occur.
Recently, one of our subscribers asked the following question:
Recently, one of our subscribers asked the following question: I am looking for guidance on developing a lockout program where I can protect my employees from disassembled equipment while transferring the locks without having a physical hand off. Our second shift must leave equipment disassembled and locked out at midnight when they go home. We […]
A worker at a Wisconsin cheese factory lost two fingers in an amputation incident in January 2013. The worker was operating an unguarded cheese packing and labeling machine. When OSHA investigated the incident, it discovered that a similar amputation had occurred a year earlier. According to OSHA, the amputations could have been prevented by the […]
Yesterday, we looked at OSHA’s answers to some employers’ questions about training certification and LOTO verification. Today, we’ll look at what OSHA has to say about workers performing maintenance on plug-and-cord-connected equipment covered under an exception in the LOTO rules. Employers often write to OSHA asking for clarifications of its requirements. Sometimes, OSHA writes back. […]
Here’s a question: Your employees carry identification badges that identify the individual employee when it is swiped on an electronic reader. The badges are used for workplace security, documenting time on the clock, and recording attendance in training classes. The badge-swiping system identifies individual employees, but is not equivalent to an “electronic signature.” Is it […]