Drums not properly managed can lead to expensive liabilities for communities or businesses, such as testing, removal, and disposal, as well as contaminated soil and groundwater that will also have to be disposed of properly or treated. For example, open drums that contain a residual product and that are allowed to collect rainwater – may overflow, leading to their contents being tested and handled as a hazardous waste.
Collection of Drums
Drums collected for reuse or recycling should arrive at the facility empty. Not “empty” in the sense that it appears to be empty, but “legally empty” – empty in accordance with the RCRA empty container standards at 40 CFR 261.7. This “RCRA empty” standard means that all wastes have been removed from the drum by the generator using common practices such as pouring, pumping, and aspirating for liquids (no free liquid can remain). For closed head drums with contents that cannot be poured, there can be no more than 1 inch of residue in the drum, or no more than 3 percent of net weight stuck to the bottom, top, and sides.
Collection and reuse of drums that have contained acutely hazardous materials, like pesticides or cyanides, is discouraged as the drums will contain residues of prior materials unless they are "triple rinsed." In addition, the residue on the bottom of one drum should not be added to the residue of another drum as this may lead to the mixing of incompatible materials or the accumulation of a hazardous waste mixture.
Environmental Compliance in [Your State] gives you expert analysis of your state environmental regulations, along with instant comparisons between federal and state environmental protection agency regulations. Every key 40 CFR topic is at your fingertips. Get Your Free Trial
Drums Being Used or Collected for Reuse
Address the following if your drums are being used or are destined to be reused by solid waste facilities:
- Drums should be empty, with no residual materials inside, on the top or outside.
- Drums should be structurally sound, without big dents or rust.
- Drums should be located in areas clearly visible to prevent damage from motor vehicles.
- Open head drums should be covered with lids sealed by heavy-duty, bolt clamps, snap rings, or bungs.
- Drums should be placed off the ground on an impermeable surface in a covered containment area to prevent corrosion and discharges to groundwater.
- Drums should be stored away from the eaves of a roof and any heat sources.
- Drums should be located away from wetlands, surface water, wells, property lines, flood zones, and drainage areas.
- Drums should not be covered with other materials where they may become forgotten, knocked over, or develop unseen leaks.
- Drums being used should be labeled and face outward so as to be easily read, and accessible year-round in case of fire, removal or spills.
- Drums should be regularly inspected for structural integrity, e.g., rust, cracks, or leaks.
State environmental compliance is probably your biggest job challenge—the regulations and laws are so complex and they change so fast! Take a free trial of Environmental Compliance in [Your State] and see why thousands of companies have relied on the Environmental “Red Book” for over 16 years. Get Your Free Trial
Drums for Scrap Metal Recycling
Drums collected for recycling as scrap metal should meet the following criteria:
- Empty drums should have the top and bottom removed by the generator before being accepted by the facility to prevent the accumulation of rainwater. A torch should not be used to remove the top or bottom of a drum as the drum may contain a flammable gas and could explode. Mechanical openers are commercially available and that should be used to accomplish this task.
- Drums should be clean.
- Drums should be flattened to save space.
Many communities that collect used oil for recycling, use drums to collect and store the used oil and/or used oil filters. Drums containing used oil must be labeled "Used Oil for Recycle," and drums containing used oil filters should be labeled “Used Oil Filters.”
The Bottom Line
All drums should be managed to prevent contamination. Keep your drums sealed, easily accessible, and labeled, and frequently inspect them for possible leaks or spills.
Every Key 40 CFR Topic At Your Fingertips
It’s not easy to keep up with state compliance – the laws are complex – and they change so fast! But there is good news. Environmental Compliance in [Your State] gives you expert analysis of your state environmental regulations, along with instant comparisons between federal and state environmental protection agency regulations.
As part of your subscription, you’ll also receive a quarterly insert. This added feature, EHS & Your Business, will help you inform senior management and other key decision makers in your company of business-critical developments in the field of environment, health, and safety (EHS).
Worried about those ever-changing regulations? Environmental Compliance in [Your State] is the fastest and most reliable way to keep up with federal and state EPA regulatory changes – Introducing RegUpdate! Your subscription now includes twice weekly e-mails that alert you to new, proposed, or amended regulations and notices in real time. You can also customize by topic – such as Air, Water, etc. to save time, work, and worry.
Learn More or Take a Free Trial today to see how Environmental Compliance in [Your State] can make your job easier.